Users typically seek "P75-368V6.5 software" for repairs or to fix a TV stuck on the logo (boot loop). Updates are usually performed via the USB port using a .bin or .img firmware file. P75-368V6.5 three-in-one android 9.0 Quad Core TV size
Power button on the TV (not the remote) and plug the TV into the wall. The indicator light should start flashing rapidly. Release the button and wait until it stops. 3. Troubleshooting Common Issues Stuck on Logo: Often caused by corrupted firmware or full internal storage. A "Hard Reset" via the recovery menu is difficult on this board; a fresh USB firmware re-install is usually the only fix. Backlight Issues: If the TV has sound but no picture, check the voltage on the board's backlight section. These boards often have failing capacitors near the 107V output area. Slow Interface: Since this board typically has limited RAM (often 1GB), avoid heavy apps. Clearing the cache from the settings menu can help temporarily. Are you trying to fix a specific problem like a "boot loop" or a "mirror image" after a previous update? AI can make mistakes, so double-check responses Copy Creating a public link... You can now share this thread with others Good response Bad response 6 sites Facebook p75-368v6.5 software