This mimics the design of a professional closet auger. It uses a rigid tube to get past the trap way, preventing the "spaghetti noodle" effect you get with flexible snakes.
This is the most recommended homemade method because it is non-abrasive and cannot scratch porcelain. diy toilet snake
An old rag or duct tape (crucial to prevent scratching the porcelain) Rubber gloves Step-by-Step Instructions: This mimics the design of a professional closet auger
However, there is a critical rule for toilets: Toilets are made of vitreous china (ceramic). If you put a piece of solid metal wire down there and scrub aggressively, you will scratch the glaze. Once the glaze is scratched, waste sticks to it, and eventually, the metal can crack the porcelain. You need a tool that is rigid enough to push, but soft enough not to damage the bowl. An old rag or duct tape (crucial to
Pour the water from waist height into the bowl. The force of the falling water, combined with the soap, often acts like a "liquid snake," pushing the clog through the trap. 3. The Baking Soda & Vinegar "Snake"
Sometimes you don't need a physical rod to clear a clog. You can create a "liquid snake" that uses heat and lubrication to move the blockage along. What You’ll Need: Dish soap (Dawn works best) A bucket of hot water (NOT boiling) Why it Works:
