The Fresenius 6008 is versatile and supports a wide range of renal replacement therapies:
| Alarm | Cause | Immediate Action | Fix | | :--- | :--- | :--- | :--- | | | Clot in drip chamber, kinked line, needle issue | Stop pump, check venous needle | Flush, reposition needle, change chamber | | Arterial pressure low | Poor access flow, needle against wall, pump speed too high | Reduce QB, check arterial needle | Reposition needle, lower QB, or check access | | Air alarm | Air in venous chamber, low blood level, sensor dirty | Stop pump, clamp venous line | Lift chamber to fill, check O-rings, clean sensor | | Blood leak | Ruptured dialyzer membrane | Stop UF, go into bypass | Check dialysate – if pink, change dialyzer | | Conductivity low | Empty concentrate, wrong A/B connection, pump failure | Switch to bypass, check concentrate levels | Re-prime with correct concentrate | | TMP high / low | Clotting in dialyzer, kinked lines, UF rate mismatch | Reduce UF rate, check for clots | Change dialyzer if TMP > 300 mmHg despite adjustments | | Temperature alarm | Heater failure or dialysate too hot/cold | Stop treatment, switch to bypass | Do not use – call biomed | | Bypass active | Fluid parameter out of spec | None – machine auto-bypasses | Wait for auto-recovery; if prolonged, change batch | fresenius 6008 machine
: An ergonomics study found that the 6008 requires roughly 50% fewer hand and finger presses compared to the older 5008 CorDiax model. Most operations can now be executed with "light force," significantly reducing physical strain on clinical staff. The Fresenius 6008 is versatile and supports a
: A standout feature is the standard inclusion of HighVolumeHDF (Hemodiafiltration), which has been linked to a 23% reduction in mortality risk compared to standard hemodialysis. 6008 CAREsystem - Fresenius Medical Care 6008 CAREsystem - Fresenius Medical Care | Code
| Code | Meaning | User Action | | :--- | :--- | :--- | | F02 | Conductivity cell failure | Restart – if persists, call biomed | | F17 | Bypass valve stuck | Do not use – service only | | F24 | Heater overtemperature | Hard fault – service required | | F41 | Air detector calibration lost | Clean sensor, rerun prime | | F88 | Internal leak detected | Place in service mode, call technician |
The 6008 series is built on the platform, which focuses on improving cardiovascular outcomes for dialysis patients. It allows for the implementation of advanced therapies that go beyond standard dialysis.
: It is noted for being more environmentally friendly by using lightweight materials (Biofine) and automatically emptying the system post-treatment to reduce the weight of hazardous waste.