Mount the ISO via the iLO Virtual Media or create a bootable USB.
Before updating the firmware on your DL360 Gen9 server: dl360 gen9 firmware
Updating only the iLO, BIOS, or System Programmable Logic Device (CPLD) without a full ISO download. Mount the ISO via the iLO Virtual Media
Patches for Spectre, Meltdown, and side-channel analysis. Firmware on the DL360 Gen9 is not a
Firmware on the DL360 Gen9 is not a single entity but a collection of interdependent components. The most critical are the , which initializes hardware; the iLO (Integrated Lights-Out) , the server’s out-of-band management processor; and the firmware for storage controllers (e.g., Smart Array P440ar), network adapters, and power supplies. Each of these subsystems runs its own low-level code. When they are out of sync, the server may exhibit symptoms ranging from subtle performance degradation to complete boot failure.