Df057 Megane 2

Fuel injection or air-fuel ratio imbalances (rich/lean conditions). For a Car Sale or User Manual Note

Use a multimeter to check the resistance across the two pins of the solenoid. Usually between 6.5 and 9.5 ohms . df057 megane 2

If you see the DF057 code on your OBD2 scanner, follow these steps to resolve it. 1. Inspect the Connector df057 megane 2

: Use an OBD-II scanner to clear the fault and see if it returns after a short drive. df057 megane 2

The wiring loom that runs to the glow plugs or the control unit is exposed to high engine heat and vibration.

When this fault code is present, you will typically notice the following issues: