ONIE Recovery on x86-enabled Netberg Aurora switches

This page describes how to install the ONIE boot loader on Netberg Aurora switches.

1. Download the recovery image suitable for your switch or build one from GitHub.

Intel Tofino-based switches:

Aurora 610 recovery image

Aurora 710 recovery image

Aurora 750 recovery image

Aurora 810 recovery image

Innovium-based switches:

Aurora 615 recovery image

Aurora 715 recovery image

Broadcom-based switches:

Aurora 221 recovery image

Aurora 621 recovery image

Aurora 721 recovery image

Aurora 820 recovery image

Aurora 830 recovery image

Aurora 420/620/630/720 recovery image for OpenSwitch and ICOS

Aurora 420/620/630/720 recovery image for Open Networking Linux

2. Copy ONIE recovery to a USB thumb device.

Use “dd” command to copy the .iso image to a USB stick:

dd if=onie-recovery-x86_64-netberg_rangeley_p1330-r0.iso of=/dev/sdb bs=10M

3. Connect a USB thumb device to the front panel USB port.

4. Connect to the switch via serial console using standard settings:
xexmenu xbox 360

WARNING: Do not use a USB-mini USB cable, it will damage the console port on the switch.

Use the enclosed serial cable.

5. Power on the switch and press <ESC> until entering BIOS.

Go to the “Save & Exit” tab and boot to the USB drive using “Boot override” section.

aurora_bios

6. Embed ONIE to the switch.

embed_onie

7. ONIE is ready after reboot. (Please remove the USB stick)

onie_boot

Xexmenu Xbox 360 Jun 2026

However, no discussion of XexMenu is complete without addressing the ethical and legal complexities surrounding its use. While XexMenu itself is a legitimate tool for file management and homebrew launching, it became infamously associated with video game piracy. The ability to launch games directly from the hard drive without the disc—a feature facilitated by XexMenu’s file management capabilities—led to widespread misuse. This dual-use nature placed the software in a grey area; it was a vital instrument for developers and enthusiasts wishing to extend the life of their aging hardware, yet it was also the primary enabler for software theft. This association often cast a shadow over the legitimate homebrew community, forcing a cat-and-mouse game between console security teams and modders.

How To Install Xex Menu 1.2 On Your Xbox 360 RGH Console (EPISODE 1) - YouTube. This content isn't available. HORIZEN: https://www... SavelaGame.ru https://savelagame.ru Как установить игры на Xbox 360? - SavelaGame.ru Как установить игры на Xbox? * Включаем приставку, нажимаем кнопку лотка и помещаем в него DVD-диск с игрой. * В главном меню прис... Reddit xexmenu xbox 360

Xexmenu is a popular homebrew menu and file manager for the Xbox 360, which allows users to manage and launch custom content, such as games, applications, and demos, on their console. It was created by a developer known as "xeXToR" and has been widely used by the Xbox 360 homebrew community. However, no discussion of XexMenu is complete without

Copy, move, delete, and rename files across the internal hard drive (HDD), USB storage, and even the system flash. This dual-use nature placed the software in a

Being open-source, Xexmenu has a community of developers and users who contribute to its development, provide support, and share resources.

Xexmenu offers enhanced network capabilities, including file sharing and streaming.